20:36:06 GMT+0000 (Coordinated Universal Time)

0000708A

ZKLR0624-2Z

Flanged housing unit

Angular contact ball bearing units ZKLR..-2Z, double direction, for screw mounting, gap seals on both sides

Quantity (pieces)

Add to product comparison

ZKLR0624-2Z

ZKLR0624-2Z

ZKLR0624-2Z

Unit system

Main Dimensions & Performance Data

d	6 mm	Bore diameter
	0 mm	Bore diameter upper tolerance
	-0.008 mm	Bore diameter lower tolerance
D	20.5 mm	Outside diameter bearing pot
	0.03 mm	Outside diameter bearing pot upper tolerance
	-0.01 mm	Outside diameter bearing pot lower tolerance
B	12 mm	Width, inner ring
	0.25 mm	Inner ring width upper tolerance
	-0.25 mm	Inner ring width lower tolerance
C_r	4,100 N	Basic dynamic load rating, radial
C_0r	2,060 N	Basic static load rating, radial
C_a	1,650 N	Basic dynamic load rating, axial
C_0a	1,520 N	Basic static load rating, axial
C_ur	107 N	Fatigue load limit, radial
M_RL	0.04 Nm	Bearing friction torque
≈m	22.9 g	Weight

Mounting dimensions

d_a	8 mm	Diameter shaft shoulder
D_ai	16 mm	Support diameter outer ring inside
D_{aa min}	19 mm	Minimum support diameter outer ring outside
	M4	Screw size
n	4	Number of screws
	M6	Screw size b
n	2	Number of screws b
t₁	0.2 mm	Position bore in the housing

Dimensions

d₁	9 mm	Rib diameter inner ring
r_min	0.3 mm	Minimum chamfer dimension
d₂	4.5 mm	Fixing boring diameter
A₁	24 mm	Flange width
A₂	35 mm	Height flange
b	6.6 mm	Wide fixing groove
m	26 mm	Bore distance height
n	15 mm	Bore distance width
M	32 mm	Distance fixing groove
H	13 mm	Height housing
	0 mm	Height housing upper tolerance
	-0.5 mm	Height housing lower tolerance

Additional information

c_aL	14 N/µm	Rigidity axial
M_m	0.0014 kg*cm2	Mass moment of inertia
	7 µm	Axial runout
	ZM06	Locknut 1
M_A	2 Nm	Tightening torque nut

Downloads:

Data sheet (PDF)

Your current product variant

Sealing

2Z

Minimal gap seals on both sides

Recently viewed products

Wait to see recently viewed products